In China, the Redmi K60 and Redmi K60 Pro came out in the last week of December. Recently, the newest smartphones have been taken apart in great detail to show how they work and how easy they are to fix. WekiHome took apart both the Redmi K60 and the Redmi K60 Pro and found parts that were the same and parts that were different. Both have a 6.67-inch AMOLED screen that can show 2K content at 120 frames per second. The Redmi K60 has a Snapdragon 8+ Gen 1 SoC in its base model, while the Redmi K60 Pro has a Snapdragon 8 Gen 2 SoC.

The Redmi K60 and Redmi K60 Pro dual-SIM (nano) tray is the first thing that is opened in the nine-minute video by the YouTube channel WekiHome. The trays are under the two phone handsets. When you take off the back glass, you can see a black frame and a wireless charging coil.

Redmi K60, and K60 Pro teardown shows similar internals

Both devices have cameras on the back, but they are in different places. The Redmi K60 Pro has a larger sensor than the regular Redmi K60. In the video of the model being taken apart, you can see a plastic bracket wrapped around the base model.

The flash cable is stuck to the back of the device, and when you look at it, you can see that it has an LED lamp bead and a light sensor on the back. The designs of the motherboards are also a lot alike. The video blogger notices that both motherboards’ heat sinks only have one layer. The smartphones in the Redmi K60 line have different cameras, but their chipsets and memory are all the same. The Redmi K60 Pro is a powerful smartphone. It has the latest Snapdragon 8 Gen 2 processor, LPDDR5X RAM, and UFS 4.0 storage. The Snapdragon 8+ Gen 1 runs the base model, which also has LPDDR5 RAM, UFS 3.1 storage, and a Qualcomm Adreno 630 GPU.

When the circuit board was taken apart, it was clear that the two phones’ earpieces were almost exactly the same, even though they were made by different companies. Both power sources are simple and only have one cell. The Redmi K60 Pro’s 5,000 mAh battery can be fast charged with 120W, but the Redmi K60’s 5,500 mAh battery can only be fast charged with 67W.

The screen can also be seen clearly in the deconstruction video. The YouTuber takes apart the screen by scratching at the glue that holds it together. The screens on the Redmi K60 and Redmi K60 Pro are made by CSOT and have a copper foil coating on the back and C6 luminescent material.

Two holes in the collapsible film show a VC chamber that is 5000mm on a side. The vapor chambers on the Redmi K60 Pro are yellow, which makes them stand out. The person on YouTube says that the Redmi K60 Pro will use less power overall. He does say that the devices will work at about the same temperature, though.

How does the Redmi 12 Pro+ stack up against the Realme 10 Pro+ 5G? Compared to the Redmi Note 11 Pro+ 5G, how does it do? Orbital is the podcast for Gadgets 360, where we talk about this and other things. Orbital can be streamed on all of your favorite podcast platforms, such as Spotify, Gaana, JioSaavn, Google Podcasts, Apple Podcasts, Google Play Music, Amazon Music, and more.

(Visited 9 times, 1 visits today)

By Masroor

Leave a Reply

Your email address will not be published. Required fields are marked *